Comments
-
I know this may sound lame, and ypou tried different cables, but this system seems to be very picky abut the cable. The short, shielded cable that comes wit the kit may be your best bet. I have tried pther cables, and they give intermittent perfo…
-
I have discovered that this system is very picky about the USB cable. Some work, some don't. The short, shielded cable supplied with the kit is perhaps the best bet.
-
Does the red light come on (to the right of the USB connector on the white PicoBricks board) when you connect it through the USB to your computer? What happens when you press the 'reset' (red button on the white PicoBricks board below the green P…
-
Do you mean the key fob reader? That is an advanced system, that requires a steep learning curve. You have to make pin connections directly to the board through the jacks on the black connector on each side of the pico board. There is no library …
-
You can't even efficiently solder across the trace breaks on the bottom. Once the mini boards are broken off, they are seperated for good. You have to use jumpers. And you can not use an add-on board attached to the jumpers along with the mini b…
-
Yes there s a problem with the MicroBlocks library code for temperature and humidity. Sometimes the DHT sensor library works, sometimes it does not. More often, it is the temperature that returns the correct value, even though the data is in the …
Howdy, Stranger!