-
Some Helpful Tips / Links for MicroBlocks Users
When you are working in the IDE, as you move the mouse over the various blocks in the menus, the bottom status line will display a short description of the block your mouse is over. Upon right-clicki… (View Post)1 -
Re: HC05 Not Working
HC-05 Users, You cannot use the module blindly. Need to know what state it is in and its default settings. Normally, the module will have a RESET button on it to put it into CONFIG mode. Pressing the… (View Post)1 -
Re: Pin guide for Picobricks?
@rebound123 I don't know if this will help you at all, but here are the pin assignments as used by the PicoBricks Library in MicroBlocks. OLED uses i2c. ESP01 and Bluetooth modules use the SERIAL pin… (View Post)1 -
Re: Temperature sensor not working
Hi everyone, We have found a strange timing problem with the DHT library and fixed it. The new release will include the fix. Until than, if you want to make the Temperature project (or any project wi… (View Post)3 -
Re: Temperature sensor not working
@chad and others, experiencing i2c and other errors with MicroBlocks: Your experiences point to an out of synch condition between the code on the board and the IDE, which can be caused by various thi… (View Post)1
Howdy, Stranger!