Comments
-
Having fun with Snap and Microblocks image program. One issue I'm having is I get a blank when generating some image including any I create.
For example Alonzo supplied in example does not work. So I exported and edited image to get 128X64…
-
Disregard last tx... I figured it out... drop down within script.
-
-
@PeterMathijssen , I was able to import into Snap. Thanks for the Snap program link. I checked o…
-
Yes just loaded it up. This one works fine.
Thankstx
Gilles
-
-
-
-
I presume one could use the light sensor option to position say a solar panel to maximize solar power output.
Awesome, no?
tx
Gilles
-
Again, very cool. The use of the list like a database lookup. Again, as with your Potentiometer barwhere are you retreiving the _imghex.
tx
Gilles
-
very interesting/advanced. I'm not able to follow.
I'd really like to figure what is happening within this code (for learning micro block code tricks of course).
Can you document any of this with comments added to help one understand.…
-
I got reverse by simply pivoting 180 then forward command.
-
very simple and very very cool
tx
Gilles
-
Hi Turgut,
You showed me this trick on our Zoom call. I could not drag it to the laptop micoblocks screen. Same is happening here. But I am able to click on the "here" above. It lauches the web microblocks. I can then save that to my comput…
-
truncated the url to https://github.com/Robotistan/PicoBricks then picked Activities in the Program section.
I then picked the Program in question i.e. b…
-
Hi Turgut
Clicked on the URL above
this is what I got.
-
Thanks
tx
Gilles
-
Hi @ozerngg Naze, I tested using your above program, I get same results. Only when the PIR is touched that the cir…
-
Hi @PeterMathijssen ,I've been away from home for the 2 last weeks. I did not use smoke detector …
-
Instead of building the diode circuit, I ran this in micro blocks.
-
Confirmed E-book is correct
-
-
There are no markings on circuit board
tx
Gilles
-
From E-book (page150) Vcc is on left and Gnd is on Right.
-
Thanks I'll try that
stay tuned,
tx
Gilles
-
Oh Also Jumper in PIR is in across pin 1 & 2 (left to right)
tx
Gilles
-
The HC-05 board indicates a range of operation of 3.6-6.0 Vdc. With USB connected V+ to gnd (at Bluetooth socket) measured 3.3Vdc. Same across 3V3 - gnd on main board (as it's the same connection). With this connection my HC-05 does not power up.…
-
I tried seeing the HC05 (for pairing) with our android Samsung Galaxy 5. Does not see it.
I performed the reset and plug in of the HC05. No red light.
I do not see any evidence of this unit working.
please advise
tx
…
-
Hi again,
My model is HC05 on package. There are no markings on physical module.
I don't see red light blink. I don't get ok;
I don't see it appear on my phone to pair. I'm using Apple SE cell.
I'll touch base with you on …
-
Still don't see red light on inserting HC-05 with reset depressed.
tx
Gilles
Howdy, Stranger!